Adjustable Angle Pull-Thru Knife Sharpener

The Adjustable Angle Pull-Thru Knife Sharpener offers new, innovative features never used on a manual knife sharpener and functional performance unmatched by standard edge maintenance products. This sharpener offers two stages of sharpening (COARSE and FINE) for all types of straight edge knives with a grind on both sides of the blade and a fixed-angle slot for sharpening serrated edge blades. It will sharpen a wide variety of knives by simply adjusting the angle of the abrasive components to match the angle of the original factory grind. Just turn the dial to one of the 6 angles offered, then pull your knife through the appropriate slot(s). Its that easy! Stop messing with those difficult to use, cumbersome, and timely Precision Sharpening Kits and get an Adjustable Angle Pull-Thru Knife Sharpener from Smiths.

• Sharpens a wide variety of knives; Will quickly sharpen very dull or damaged blades

• Two stage sharpening for standard knives (coarse and fine); Serrated blade sharpener (fixed angle)

• Can be used to maintain the edge on knives that are already sharp

• Easy adjust knob allows sharpening at a wide range of angles (14 degree/side to 24 degree/side)

• Replaceable abrasive components; Soft grip handle; Non-slip rubber feet

Instructions

• CAUTION: Keep fingers and thumb away from sharpening slots during use to avoid serious injury.

• For Double-Beveled, Straight Edge Blades:

Set the sharpening angle by pushing down on the top of the adjustment knob and turning to the desired angle. If factory angle is unknown, use the angle chart on the inside of this card or follow suggested angles printed on product and knob.

Reguleeritava nurgaga Smiths teritaja pakub uuenduslikke funktsioone, mis tavaliselt puuduvad manuaalsel teritajal.

Teritaja on kaheetapiline, sobib teritama igat tüüpi sirgeid lõiketerasid, millel on mõlemapoolne teritus (COARSE ja FINE pesad). Lisaks sobib teritaja ka hambuliste lõiketerade fikseeritud nurga all teritamiseks (SERRATED pesa). Selleks  keerata ketast ja valida üks kuuest teritusnurgast, mis vastaks algsele tehase teritusnurgale.

• Teritab igat tüüpi sirgeid lõiketerasid.

• Teritab hambulisi lõiketerasid.

• Teritab kiiresti ka väga nürid ja kahjustatud terad.

• Pehme käepide.

• Mittelibisevad kummist jalad.

• Terad on vahetatavad, vahetusterad ei kuulu komplekti.

• Blisterpakend.

Ksutamine:

1. Standartsete nugade kaheetapiline teritamine. Tõmmata nuga läbi COARSE märgistusega pesa. Korrata tegevust, kuni on saavutatud soovitud tulemus. Seejärel noaterale lihvi andmiseks tõmmata nuga läbi FINE märgistusega pesa.

2. Hambulise teraga nugagade teritamine. Valida soovitud teritamisnurk vajutades ketast (nuppu) alla ja keerates seda. Kui tehase nurk ei ole teada, kasutada nurgaskeemi või järgige kettale (nupule) märgitud soovitatavaid nurki. 

Etevaatust! Vigastuste vältimiseks teritamise ajal hoida sõrmed eemal terituspesadest!