Outwell Seam Grip+WP, premium silicone sealant, stop leaks. Suitable for most materials. Washable, flexible and colourless. Applicator brush included.

Seam Grip+WP urethane rubber adhesive provides a clear, strong and flexible finish suitable for permanent waterproof repairs to holes, tears or leaking seams in most types of camping oroutdoor equipment i.e. tents, marquees, awnings, ground sheets, backpacks, footwear, gloves, inflatable mattresses or toys, bladders, ski wear and other waterproof clothing, latex neck and wrist seals and kites etc.

Specifications

• Pack size: 12 x 18 x 3 cm

• Weight: 30 g

• Content: 28 gr. tube seam sealer, 1 applicator brush

Usage

• Use Seam Grip+WP to seal areas that regularly leak, such as stakeout points at corners. Apply a thin layer and allow to dry on a level surface area. If extra strength repairs are required, once cured apply an additional layer of Seam Grip+WP on top of the original Seam Grip+WP repair

• Seam Sealing: clean surfaces with alcohol. Apply Seam Grip+WP to inside of seam. Apply thin film, holding tube opening flat against seam. Lightly squeeze and draw tube across threads. Seam Grip+WP may also be applied with brush. Use brush to even out any heavily coated areas

• Holes and Tears: create backing with removable tape. Fill void and 6 mm beyond edge with a thick layer of Seam Grip+WP. Remove tape after full cure. Let dry overnight (approximately 12 hours – may be longer in low humidity)