6 Three Stone Sharpening System

Tungsten Carbide Blades put a quick sharp edge on dull or damaged knives. These carbide blades are precision ground on both ends so they are reversible and replaceable. Precision ground carbides provide a smoother, more consistent sharp cutting edge on your knife blade. They also sharpen your blade quicker than standard carbide blades. Replacement blades for: Smiths Edge Pro Pull-Thru Knife Sharpener (item # 50090) Two blades per set. See additional images for reference to the item that uses these particular carbide blades.

• 2 Arkansas stones (Fine & Medium) & 1 Coarse synthetic stone.

• Stones Mounted on Rotating Molded Plastic Triangle for Easy Stone Rotation and Identification

• Molded Plastic Base with Nonskid Rubber Feet for Safety

• Sharpening Angle Guide Ensures Correct Angle every time

Instructions

1. Select the proper stone to use. 
   COARSE – Very aggressive and removes lots of metal during the sharpening process. Use to set a new sharp cutting edge on a very dull or damaged blade. 
   MEDIUM – Not as aggressive as the COARSE stone, but does remove moderate amounts of metal. Use for next step after starting with COARSE stone, or as a starting point for somewhat dull blades that still have a consistent cutting edge but need to be sharpened. 
   FINE – Removes the least amount of metal. Sharpens and polishes the cutting edge at the same time. Use for finishing the cutting edge to razor sharpness.

2. Put a small amount of Honing Solution on your stone. Dont use a lot of lubricant as a small amount goes a long way. Using a Natural Stone without a lubricant or water will damage and clog your stone. It protects the stone and the cutting edge of the knife or tool by washing away the particle of stone and metal created during the sharpening process. If necessary, water can be used as a substitute.

3. To insure the proper sharpening angle on your knife, place the yellow Smiths Angle Guide at the end of your stone. This shows you the proper angle we recommend to use in order to obtain the sharpest edge. Next, place your blade flat on the Angle Guide at the end of the stone. Now you are ready to begin the sharpening process.

4. Push the blade away from you just like you are trying to carve a thin slice off the top of the stone. Dont be afraid to use pressure against the stone while sharpening since it will not damage the stone or your knife. Repeat this pushing stroke 3 or 4 times. Remember, try to keep the same approximate sharpening angle all the time, since this is the key to obtaining the sharpest edge.

5. To sharpen the other side of your knife, simply place your blade at the opposite end of your Smith sharpening stone and repeat the above steps, but instead of pushing the knife away from you, pull it towards you. Continue to sharpen until you feel that your blade is truly sharp.

Care:

Cleaning your stones will keep the pores free of stone and metal particles. After each use, the Arkansas stones should be cleaned by scrubbing vigorously with water, liquid soap, and a stiff nylon brush.

Smiths 3-osaline terituskomplekti kuulub 1 jämeda struktuuriga sünteetiline kivi, 2 Arkansase kivi (Fine & Medium), vastupidavast plastist vormitud alus, lisaks on komplektis teritusõli ning teritusnurga juht.

Jämeda struktuuriga kivi kasutada nüridate ja kahjustatud lõiketerade teritamiseks, Fine Arkansas Medium sobib mõnevõrra teravamate lõikederade jaoks ja üldviimistluseks ning lihvi andmiseks kasutada Arkansas Fine struktuuriga kivi.  

• Sünteetiline ja 2 x looduslikku terituskivi ühes komplektis.

• Efektiivne.

• Kerge ja kompaktne.

• Blisterpakend.

Kasutamine:

• valida kasutamiseks sobiv kivi.

• COARSE - suure struktuuriga ja agressiivne ja eemaldab teritamisprotsessi ajal palju metalli.

• MEDIUM - eemaldab mõõduka metalli. Kasutada järgmisel etapil pärast Coarse kiviga teritamist.

• FINE - eemaldab kõige vähem metalli. Samaaegselt teravustab ja poleerib. Kasutada tipptasemel viimistluseks.

• lisada terituskivile veidi Smiths teritusõli

• asetada lõiketera teritusnurga juhi abil terituskivile

• lükata tera endast eemale, kasutades mõõdukat survet

• korrata tegevust 3-4 korda

• üritada hoida tera iga kord sama nurga all

• lõiketera teise poole teritamisel korrata sama tegevust, tõmmates tera vastassuunas, seega sisse ehk enda poole

• korrata toimingut, kuni on saavutatud soovitud tulemus.

Hooldus:

• puhastada kivisid peale igat kasutuskorda

• puhastamine hoiab kivi poorid puhtad metalli- ja kiviosakestest

• puhastada Arkansase kivi jõuliselt vee, vedelseebi ja nailonharjaga.

• puhastada sünteetilist kivi seebi ja harjaga, loputada jooksva vee all.